Loose Diamonds: Looking At Round Brilliant And Fancy Cuts

For most people, the only time they buy diamonds is when they want wedding or engagement rings. The smart way to go about this is to look for loose diamonds first and have them set later. You can inspect them for flaws better, and possibly get a better deal. However, you need to be careful when buying. It's easy to make mistakes and pay too much, or get stuck with an inferior diamond.

When looking at loose diamonds, you should confirm the diamond's value. You'll want to study each one for the four C's; carat weight, cut, clarity and color. But bear in mind that each diamond is unique, and it's rare for a single diamond to get two separate assessments with identical results. Ultimately, the value of a diamond is subjective, so you shouldn't be too obsessed looking for it's exact value.

The greatest diamond cut of all is the round brilliant cut. Thanks to the work of Marcel Tolkowsky, the proportions essential to get the most brilliance and fire out of a diamond were established and popularized. Further innovations perfected Tolkowsky's measurements to optimize diamond's potential for brilliance.

The round brilliant cut is also the perennial favorite cut. In contrast, the popularity of fancy cuts are dependent on prevailing trends. Since people are interested in sparkle right now, the heart, oval, and pear cuts are popular. However, the quality and value of a diamond is based on other factors. You can easily get a high value diamond of any cut - or low value, if you buy recklessly.

So buy a diamond jewelry gift with any cut you desire. It may be in a shape that you or your significant other like, or one that strikes a chord with you. If all you want is a big diamond, and you don't mind imperfections, it's easy to get one for cheap. But even if you are buying cheap, you have to make your purchases carefully to avoid getting gypped.

When it comes time to set your loose diamond, it's sound to have it done by the same people who sold it to you. If you bring it to another jeweler, they won't want to be held liable for any damage the diamond may receive during setting. If the seller won't take responsibility for their own diamonds, leave them for a seller who will.

For most people, the only time they look for diamonds is when they want wedding or engagement rings. The smart way to go about this is to look for loose diamonds first and have them set later. The round brilliant cut is the most enduringly popular cut. Fancy cuts become popular based on prevailing fashions. However, the quality and value of a diamond is based on other factors. So buy a diamond jewelry gift in the cut you really want.

-Lorraine Jacobs

Fine Jewelry: How Cut Affects Clarity

Is cut more important than clarity when evaluating diamonds? You could spend hours speculating on the merits of one over the other. However, to get a clear answer, you need to grasp the relationship between the two. More importantly, you'll need to think about what you value in fine jewelry.

A diamond's cut pertains to its external proportions, as well as the skill of cutting and polishing. Diamonds can be cut in such a way that it reaches its highest selling price, or maximizes its capability for brilliance. The clarity of diamonds, on the other hand, refers to the number of imperfections a diamond has. High quality diamonds have less imperfection, and are subsequently considered more beautiful and expensive.

Clearly, the skill with which a diamond has been cut will impact its clarity. In the diamond cutting and polishing process, this is one of the few factors which can be controlled. Only the most precise craftsmanship can guarantee that a raw piece of diamond will be recut into fine jewelry.

On the other hand, the clarity of diamonds can be poor independent of the quality of the cut. Clarity is also based on the quality of the original diamond. As a buyer, you need to be mindful of this and put any diamonds you intend to buy under a microscope or loupe to check for flaws yourself.

When you look at a round cut diamond, you'll realize how critical it is to cut a diamond with a reasonable amount of skill. It will also become more evident just how closely cut and clarity are connected to each other. Round cuts are famous for having the most potential for brilliance above all other cuts. Any errors in the cut or internal flaws, even minor, will reduce that potential considerably.

Do you like fine jewelry? Do you think it's the diamond with the best cut, or the highest clarity? You have to look at both factors. However, you can look at the cut first, since it affects clarity, as well as carat weight. Prioritizing one of the four C's over the others is counterproductive, if you lack a basic education on diamonds.

A diamond's cut refers to its external proportions, as well as the skill of cutting and polishing. The clarity of diamonds, on the other hand, refers to the number of imperfections a diamond has. When you look at a round cut diamond, you'll realize how important it is to cut a diamond with a reasonable amount of skill. Only the most precise craftsmanship can guarantee that a raw piece of diamond will be recut into fine jewelry.

-Lorraine Jacobs

Diamond Jewelry Gifts: The Best Ring Settings

Diamond jewelry gifts are probably the best tokens that one could give and receive. Although the value of gifts is not actually determined by their outside appearance rather from the sincerity of the one who gave such gifts, it cannot be overlooked that there are instances that we often take gratitude not only for the sincerity of the person but also the aesthetics of the gifts given to us. With these considerations at hand, diamond gifts are the ones that could suffice to the emotional and aesthetic needs that we are yearning for. Nevertheless, they are pieces that could endure the test of time.

If you have the intention to buy diamond gifts, it would be advisable to opt for loose diamonds since they are not yet affixed to any articles of jewelry. Meaning to say, you have the opportunity to have them customized based from your preferred setting. Similarly, it would be easier for you to have the gems appraised knowing that you could perceive their overall features. One of the most important features that you could look after with these kinds of diamonds is the cut.

It is important to determine exactly what a cut means in reference to diamonds and how it differs from shape. Shape refers to the outline of the stone's perimeter, while the cut or make profoundly affect the gem's appearance as it refers to the proportioning and overall finish of the diamond""two elements that are directly linked to how the diamond produces its fire or rainbows, and brilliance or the liveliness and sparkle. Accordingly, a diamond with a good cut is more valuable than a diamond with a poor cut. There are various ways in which diamonds can be cut; however, the so-called round brilliant cut is considered as the most popular among jewelers and jewelry buyers.

Round brilliant cut is the most conventional means of cutting diamonds and is regarded as the best at producing prismatic effect, which means its shape produces the most sparkle due to its ability to reflect the most light on the top of the diamond. Diamonds that have underwent this method displays greater brilliance compared to any other diamonds because there are no corners where light could hide. Hence, the brilliance and fire of the diamond could be seen at their full extent. Although there are shapes and cut that are comparable to round cut diamonds, the latter remains as the favorite of most jewelers.

Round brilliant cut diamonds are very versatile and will suit all kinds of jewelry setting. If you are looking for round brilliant diamond ring that you would be using for your proposal, there are actually many settings to choose from. Prong setting is the most conventional ring setting where a diamond is sturdily held by either four or six prongs of same height, which in turn makes the gem protrude away from the finger. Pave setting is made up of several pieces of diamonds set closely together, and in between them are little gems that hold them tightly to the metal setting, while a bezel setting has a metal rim or collar that encircle either the entire side or just a portion of the diamond that extends a bit above the stone.

Aside from the aforementioned settings, other noteworthy settings used for round brilliant loose diamonds include the channel setting, where diamonds of similar sizes are placed in a metal channel forming a row, and bar setting where diamonds are incorporated in grooves with metals to separate them from each other. Generally, there's no denying that diamond jewelry pieces are truly the perfect gifts that a person could give and receive as they encompass beauty, exquisiteness, and value. Hence, if you want to give the best to the person you love, diamond jewelry could proudly express what and how you feel toward that person.

If you are searching for gifts that are truly worthy of your money, diamond jewelry gifts would be a good preference. Loose diamonds are becoming popular today because many jewelry makers are willing to design for individuals who wish to have unique jewelry pieces. For loose sparklers that could befit any jewelry setting, choose the ones that have round brilliant cut so as to maximize the fire and brilliance they produce.

-Lorraine Jacobs

Round Brilliant Cut Diamond""A Background

Among the 4 C's of diamonds, cutting or cut is probably the least understood even though it greatly affects the cost and appearance of these articles of fine jewelry. It is noteworthy that well cut diamonds could value 40 to 50 percent more than their poorly cut counterparts. Hence, it is important that a prospective buyer should understand what cut is. With regards to diamonds, cut or make pertains to the overall symmetry, proportioning and finish of the stones that have direct impact on the levels of their fire and brilliance.

There are three basic cutting styles used for fine jewelry diamonds: brilliant cut, step cut and mixed cut. A brilliant cut utilizes several facets that are usually triangular and kite in shape and are arranged in a particular manner to optimized the diamonds' brilliance. A step cut uses lesser facets than the brilliant cut, usually in trapezoid or rectangular shape, arranged in a well-defined linear pattern. On the other hand, a mixed cut uses combined elements from the step cut and brilliant cut techniques.

Among the three mentioned cutting techniques though, the brilliant cut is the most preferred due to its ability to expose the maximum fire and brilliance of diamonds. But, if integrated with the right shape, a brilliant cut sparkler will not only show the most brilliance and fire, it would also show incomparable appeal and value. Even though there's a whole range of shapes that suit with brilliant cutting, it is probably the round shape that best complements it. As a matter of fact, round brilliant cut is the most famous shape that is closely identified with the mentioned cutting technique.

A round brilliant cut sparkler has 58 facets, 33 of which are located on the crown, 24 on the bottom, and one on the culet or point. Smaller round brilliant diamonds are called "full cut" to properly distinguish them from "single cut" stones that have 17 facets, and from "Swiss cut" diamonds that have 33 facets only. Probably by now you're asking, what is so special about these round brilliant diamonds? To simply put it, as the diamonds cut this way have no corners they could reflect the most light that passes through them enabling them to produce the most brilliance, fire and liveliness.

The round brilliant cut is an established favorite and considered "ideal" combination of cut and shape not only because of its premium brilliance but also its ability to suit all types of jewelry pieces. Diamonds cut this way are commonly incorporated on engagement and wedding rings, bracelets, necklaces and earrings since they could be arranged easily regardless of the shape and form of the jewelry. Nonetheless, they befit all settings whether it is prong or pave. Succinctly, such cut is the only cut that shows functionality and versatility all its own.

As mentioned above there many ways on how diamonds are cut. What might look strange to some, might be ideal for others. When choosing diamonds, regardless if they are loose diamonds or clarity enhanced diamonds, you should be the one to decide what type of cut you would like because the appearance of a sparkler with an ideal make would not actually appeal to you, and the diamonds without ideal proportions are sometimes receive the highest cut grade from GIA. The most important thing that you have to do is to look and compare diamonds of various qualities and prices as this will train your eyes to properly detect their differences in terms of fire and brilliance as well as lifelessness and dullness.

When searching for fine jewelry diamonds it is important that you consider the cutting technique used for the sparklers as this greatly affect their ability to produce fire and brilliance. Round brilliant cut is probably the most promising cutting style employed on diamonds since it is capable of exposing the maximum brilliance of such stones. Regardless if you like loose or clarity enhanced diamonds, the round brilliant technique will surely make them more valuable.

-Lorraine Jacobs

Diamond Rings: Spy With Your Little Eye

Clarity is one of the four C's that affects the quality of the diamond. It refers to the amount of flaws found in a diamond. These flaws are imperfections caused by mistakes in cutting or that arise from the original rock. A diamond with poor clarity will have faults that are conspicuous, even to the naked eye. They will not look pleasing set in diamond rings, and have low resell value. In contrast, a diamond with great clarity is highly sought after by collectors, and will be a gift of true value to loved ones.

Flaws can be divided into two; external flaws are called blemishes, whereas flaws within the diamond, that can modify its ability to reflect light, are called inclusions. Since inclusions get in the way of a diamond's sparkle, they can lower the value of a diamond more, but they also have their uses. Inclusions can be used to identify individual diamonds as a sort of diamond fingerprint. This can be used to secure your diamond rings.

Diamonds are graded based on the visibility of these flaws. They go through this process while they are still loose diamonds. There are several gemological organizations worldwide that have created independent grading systems, although in many cases they are very similar. You should familiarize yourself with the grading system used in the store where you buy your diamond. When looking for diamond rings, you will want to inspect the clarity of the diamond above anything else. Clarity is one of the main factors used in establishing a diamond's monetary value. It is a standard accepted by gemological organizations across the board.

To ensure you get diamonds of the highest clarity, get loose diamonds first. You can make an ocular inspection of the diamonds before buying. The jeweler should lend you their loupe or magnifier so that you can view them under 10 x magnification upon request. If they are unwilling to let you take a closer look, you may as well look elsewhere.

Don't look at jewelry stores at face value. One store may have ridiculously low prices, or limited period sales. You may think you're getting a good deal; but they'll lose most of their value in as short as ten years. Your priority should be getting diamonds of lasting value. You can find a quality diamond at a fair price, but you need to know your diamonds.

When looking for diamond rings, you will want to inspect the clarity of the diamond above anything else. Clarity is one of the main factors used in establishing a diamond's monetary value. Be careful when picking jewelry stores as well. To insure you get diamonds of the finest clarity, buy loose diamonds first. You can find a quality diamond at a fair price, but you need to know your diamonds.

-Lorraine Jacobs

Round Brilliant Cut: The Most Ideal Cut For Diamonds

Since the earliest times, diamonds have captured the attention of mankind. They are probably the most revered articles of accents provided by nature; deeply symbolizing beauty and forever. From all the stones that the world has introduced, diamonds are the most distinguished""appealing to people of all classes. Whether they are loose diamonds or blood diamonds, one thing remains a fact, they will continuously captivate the attention of generations of people.

Due to the visual pleasure we find on diamonds, they become the perennial articles used to seal symbolic occasions like engagements and weddings. Fine diamond rings and other diamond jewelry pieces have turned into valuable possessions with an equal footing to real estate and artworks. Because of all these, availing diamonds transformed into an endeavor that requires proper education about the characteristics of such stones so as to arrive at informed purchasing decisions. While much has been said about the clarity, color, and carat of diamonds, not all of us are very familiar about the facet of diamond cutting.

Cut with an emphasis on diamonds, refers to the guide of style or design used to shape a diamond for polishing. This does not pertain to the shape of the diamond, rather the symmetry, proportioning and polish, which directly affects the stone's brilliance and fire. The history of diamond cutting can be traced from as far back as the middle ages, and has since been innovated until today. Although many cutting styles have emerged and fall off along the way, the round brilliant cut remains as one of the most revered by jewelers and jewelry aficionados alike.

Round brilliant cut was first introduced in 1919 by Marcel Tolkowsky, Belgian diamond cutter. Since Tolkowsky was an engineer by profession, he's discovery of the said cut was based from definite mathematical and empirical analysis, taking into account the importance of brilliance and fire in diamonds. As a result, a diamond cut this way exudes 58 facets""33 on the crown, and the rest are found in the stone's bottom part including its point or culet. Likewise, it yields two diamonds in one cut, one larger than the other; hence, very little diamond pieces are wasted.

A round brilliant cut diamond that is cut properly creates a shape that permits more light to reflect on the diamond in differing angles, enhancing its brilliance and fire. Because of its safe shape, diamonds that are round brilliant in cut have higher levels of "saleability," insurability and visual optics. Other than these qualities, diamonds that are round brilliant in cut are also revered for their versatility to befit any type of jewelry setting. As such, it is not a surprise to know that approximately 75 percent of diamond jewelry sales are credited to this kind of cut.

If you intend to purchase loose diamonds that will be utilized to customize your chosen jewelry piece, it would be more appropriate to settle for pieces that are round brilliant in cut. With the outlined characteristics of such cut, you could definitely maximize not only the extrinsic features of your diamonds but also its saleability and insurability. Nonetheless, as it is truly versatile, it will not be a trouble anymore to find the right setting to use for your jewelry. To simply put it, you can never go wrong with diamonds that are round brilliant in cut.

If you are looking for diamonds, you may want to consider loose diamonds, which would give you the option to choose your desired setting for your fine diamond rings. However, to further maximize the value of these loose sparklers, pick the ones that have round brilliant cut. This cut is noted for its ability to exemplify the greatest brilliance and fire in diamonds.

-Lorraine Jacobs

Diamond Heart Jewelry: Check For Quality

The round brilliant cut is considered the gold standard for diamond cuts. Designed to maximize the potential of a diamond's brilliance, this cut is also known as the most wasteful, with over half of the raw diamond thrown away to get to this ideal shape. Not to say that it's the only shape diamonds should be in. In fact, the diversity of diamond cuts adds to their overall appeal.

And diamond heart jewelry is as appealing as it gets. Heart cuts have a lot in common with the pear cut, but vary in height and width. The heart cut retains some brilliance found in the round brilliant cut, but also shows off the diamond's other qualities, like clarity. Bear in mind that this shape was not invented casually. The heart cut is fundamentally the pear cut with a cleft added in.

Admittedly, diamond heart jewelry may not appeal to everyone. Some people may feel that it is too trifling to use in their wedding rings. Still, it is hard to question the romantic appeal of the heart shape. Since it is a relatively modern cut, there are less requirements in making heart cut diamonds compared to round brilliant.

In comparison, with round brilliant cut diamonds, your primary interest is in the brilliance of the piece. Diamond makers refined Tolkowsky's Ideal Cut, the original standard for the round cut. Thanks to the progress in the science of refraction and manufacturing technology, they're able to utilize a raw diamond's potential to reach maximum brilliance.

It is imperative that you do a quality check before any purchase of diamond heart jewelry. In particular, you need to confirm that it does not have any blemishes, cracks or other imperfections. Some imperfections are not visible to the naked eye, but still alter the diamond's value. These imperfections do become detectable under the microscope, and are considered when the finished diamond is graded and priced.

If you prefer to get more value for your investment, you should watch out for enhanced diamonds. These are treatments performed on diamonds after they have been cut and polished, to remove these imperfections. Government regulations require that any enhancements be disclosed to potential buyers. These treatments reduce their value and are only performed on seriously flawed diamonds.

It is imperative that you do a quality check before any purchase of diamond heart jewelry. Particularly, you need to check that it does not have any blemishes, cracks or other imperfections. With round brilliant cut diamonds, your primary concern really is just the brilliance of the piece. You should watch out for enhanced diamonds. These are treatments performed on diamonds after they have been cut and polished to remove these imperfections and reduce their value.

-Lorraine Jacobs

Diamond rings: A beautiful piece of investment

People with extra money would usually channel their funds on investments that can earn their money interest.To help their money grow, they would usually acquire assets like land or stocks and even condominium units because they can generate revenue as their value appreciates.

On the other hand, other people would skip investing on assets like these and would rather spend on things that would cater more to their interests.And what else can cater to their interest but their hobbies which can be a more delightful way to spend their extra cash.

There are a number of hobby collectibles that can be considered a reasonable investment just like toys, fine jewelry and luxury cars which gain value over time.However, choosing the right type of toy or jewelry, like diamond rings, is the key to finding the ones that really appreciate in value as time goes by.

Rare toys that are kept intact and in the box over time usually gets more expensive and can be sold for almost twenty times more of its original price.Another good example is fine jewelry because this definitely appreciates in value in time.Jewelry with diamonds like diamond rings and bracelets can definitely get more valuable as the years go by.

Diamond rings does not only serve us a sound investment but it also can be a symbolic gift for a person that you truly care forAs they say, diamonds last forever, which makes it and even more sound luxury investment given that other assets can actually degrade in quality or go out of style as the years takes its too on it.

In a nutshell, spending extra money on assets and investments is a smart thing to do as it should be dictated by the desired outcome as time progresses.Looking into the non traditional methods of earning profit or interest for your money can be a good way to start as there are numerous ways available that can reap rewards and feed someone's happiness and interest at the same time.

While some people spend on assets like condominium units or land to make their money grow, others choose to invest on their hobbies and interests instead. Some like fine spending on fine jewelry or expensive cars or rare toys. This is a smart investment because like diamond rings or rare toys, they can only get pricier as the years go by.

-Lorraine Jacobs

How To Purchase Diamond Jewelry

Probably by now you're thinking of offering your bride a diamond ring and ask for her hand in a marriage. The idea seems simple enough; you'd go to a jewelry store, select a diamond worthy for your beloved, pay for it and you're ready to go. Realistically speaking though, this isn't always the case because when you first look at the price tag of your chosen sparkler you'll soon realize how nerve-racking it really is to purchase diamond jewelry gifts. If you are planning to buy a diamond, it is imperative that you take charge of your transaction, and in order to do so you must be well informed about the tricks of the trade in order for you to get the most for your money.

Fred Cuellar, a gemologist and world-renowned diamond expert, believed that there are four things that a buyer has to consider when purchasing diamond jewelry gifts: budget, expectations, savvy and timetable. In terms of budget, you should try to figure out first how much you intend to spend on buying diamond, and you should stick to that budget outlay; a month's salary could already be a good starting point. For expectations, it is important that you know and understand the needs and wants of the person to whom you are going to give the diamond so that you will have an idea what to look for and what to pick out from the bunch. Being savvy is a good means for you to be updated about the cost of diamond pieces and the current trend in design; on the other hand, you should give yourself enough time to prepare for things including when to purchase and when to give the diamond and this is when setting a timetable becomes essential.

Since you are now aware of the general basics, you should also consider where to buy your sparklers. You have two options where you could get your diamond jewelry gifts, first is for you to go online and second is to check your local jewelry shops. Buying online is probably one of the most practical means to buy diamond gifts because you don't have to break a sweat and everything is just one click away; however, the drawbacks with this are you cannot appraise the diamond and the possibility of scams are high but if you really want this option, be sure to do a background check on the online stores where you intend to purchase. The latter option of buying your diamond gifts on you local jewelry store is a better choice because you would be able to appraise the diamond personally and long time jewelers could help you out with your questions, which would assist you in arriving at the right decision.

For the diamond, always consider the 4Cs""clarity, color, cut and carat, as these elements help determine the true value of such gemstone. Clarity is what determines how free from blemishes and inclusions a diamond is. As each diamond vary from one another, they are assigned with corresponding clarity grades that may range from flawless to obvious inclusions. In fact, there are so-called clarity enhanced sparklers that are treated to reduce their imperfections via irradiation, filling imperfections, or laser drilling, but they are cheaper than diamond pieces that aren't treated.

With regards to color, diamond pieces are available in different shades; however, colored diamond pieces are very rare and expensive, so it is more likely that when you visit shops you'd observe that only white and yellow sparklers are available but between these two colors, it's always best to settle for whiter diamond pieces. The yellow coloring of sparklers came from nitrogen; hence the yellower the stone, the lesser its value this is because such color makes the diamond less sharp and sparkly. As for the cut, diamond pieces could be cut in wide variety of shapes such as round brilliant cut, marquise, box and more. More than indicating the shape of the diamond, a cut also determines how sparkly such gemstone will be.

It is never enough for a diamond to be just white and clear, unless cut in the right manner your diamond will not sparkle. Though cut is extremely difficult to evaluate, you could be able to do this by identifying three of its characteristics: brilliance, fire and scintillation; but if you want to take a short cut, the standard round brilliant cut is probably the best choice as all the other cut are considered as fancy shapes. Finally, the carat is the standard weight unit of diamond. Majority of diamond pieces used for fine jewelry often weight one carat or less; this is because a fraction of a carat can make a big difference on the value of diamond.

Purchasing diamond jewelry gifts is a daunting task. Hence, it is always best to be an informed buyer in order to get the most out of your money. Not because a diamond is round brilliant cut doesn't mean it's already a good purchase. Remember that there are still three remaining Cs that you have to consider. A clarity enhanced diamond might be inexpensive but also consider the quality. Educating oneself is a good way to make the right purchasing decisions.

-Lorraine Jacobs

Fine Jewelry Forms And Functions

The visual appeal of fine jewelry has never failed to capture our attention. In fact, jewelry pieces have been objects that denote social status especially during ancient times. They have significantly shaped many traditions that we know today. From necklaces and earrings, to rings and bracelets, these jewelry pieces have provided humans with material satisfaction that no other objects could provide.

There are many types of fine jewelry pieces to choose from. Some are worn as adornments, while others serve as symbolic tokens presented in different occasions. There are articles of jewelry that are plain and cheap, while there are also pieces that are so ornate, they are often expensive. Some of the most popular and commonly used pieces would be discussed here to provide further understanding about their qualities and uses. Rings are probably the most common forms of jewelry known to man. They usually come in differing varieties, the most common of which are in plain cylindrical bands adorned with gemstones like diamond heart or round cuts, spiral or serpentine coils, signet rings, and open on one side. Rings have different functions but they are commonly used as symbolic tokens during engagements and weddings or just to accentuate the fingers. As for signet rings, these hoops are customized to carry the emblems of fraternal orders or insignias of some organizations and are worn by the members of such organizations.

Another type of jewelry is the necklace, which is intended designed to be worn around the neck. Necklaces come in four general structures: close fitting collar band accentuated with precious gems or beads, chain necklace with pendant, raw of beads or stones in graduated sizes held by wire or chains, and strings of different lengths worn on top of each other. Necklaces can be created from various materials but works well with metals, gemstones or the combination of two, and they are usually partnered with pendants made from gemstones with the diamond heart being one of the most sought after pendant design. To further highlight the beauty of necklaces, they appropriately worn with dresses that have low necklines as this design helps the jewelry to become the focal point of the person's upper body.

Meanwhile, earrings are jewelry for the ears that can either be set on against the ear lobes or hanging drops like pendants. The most favorite form of earrings set against the earlobe is the pair of pearls, while popular hanging drops are the ones referred to as chandelier earrings. Traditionally, it is a requisite to have the ears pierced when wearing earrings as this practice was once considered a barbaric act. Today, earrings can be worn by means of clipping them to the ear, though the method of ear piercing is still practiced.

Another type of fine jewelry is the bracelet, which is worn on the arm. Such large piece of ring-like jewelry can be in the form of closed band, spiral coil, open on one side, closed with clasp as well as flexible rings formed as links. Aside from the ring, necklace, earrings and bracelets other form of jewelry pieces include pins, cuff links, anklets, chains, brooches, and collar buttons. Generally, there are many jewelry pieces that vary in function, quality and design; it is already up to the individual what jewelry to use in accordance to his or her desired function.

Fine jewelry pieces are created to adorn nearly every part of the body. Necklaces with diamond heart pendants are used to accentuate the neck, bracelets are worn to highlight the arms, while rings and earrings are used as personal ornaments for the fingers and ears respectively. Although artistic display has been the main function of jewelry pieces, they have also been utilized for reasons like currency, protection, status, and symbolic tokens to name a few.

-Lorraine Jacobs

Loose Diamonds: All The Brilliant Cuts, And Otherwise

Why purchase loose diamonds? They're not exactly as practical as earrings and necklaces. You would not be able to carry them around with you anywhere you go. But diamonds have a beauty on their own that can't be matched by diamonds set in jewelry. They seem even more special when they are bought for their own sake.

Diamonds are produced in a variety of designs, known in the trade as cuts. The most well-known of these is the round brilliant cut. Simply put, the round brilliant is the most famous because it provides the most brilliance. The way it has been cut makes it reflects the most light. What most people don't know is that the shape of the round brilliant is the least practical. As much as half of the original diamond is left out when it is turned into a round brilliant. For this reason, diamonds are sold in several other shapes as well, commonly known as fancy cuts.

Now some of the fancy cuts are already based on familiar designs, and will appeal to people even if they don't know much about diamonds. The heart and oval cuts are self-explanatory. The pear cut is often seen as an upside down teardrop.

On the other hand, how do you explain to people the differences between the Asscher and emerald cut, or the princess and radiant cut, when they all share the same rectangular shape? This is where we get a bit technical, but fortunately you don't have to dig that deep.

Emerald and Asscher cuts are both step cuts. Compared to the round brilliant, they are rectangular in shape, with each side bordered with small steps. Step cuts emphasize lustre and clarity over brilliance. The Asscher cut is the older of the two, and its proportions are less even.

The princess and radiant cuts are categorized under a third kind of cut, the mixed cuts. They evoke the brilliance of brilliant cuts, but are more practical to produce. The princess cut is only second to the round brilliant in its popularity, whereas the radiant cut has over 70 cuts.

When selecting loose diamonds, you need not be intimidated by technical knowledge. You can buy based on what cut you prefer. The jeweler, in turn, will narrow down your choices in terms of price and quality, and help find the best deal for you.

Diamonds are available in a variety of designs, known in the trade as cuts. The round brilliant cut has been designed in such a way that it reflects the most light. Step cuts stress lustre and clarity over brilliance. Mixed cuts have more brilliance than step cuts, but are more cost-efficient than brilliant cuts. When choosing loose diamonds, you need not be intimidated by technical knowledge. You can buy based on what cut you prefer.

-Lorraine Jacobs

Diamond Enhancements: A Simple Guide To Clarity Enhanced Diamond

Diamonds are perhaps the commodities that most women around the world yearn to own. In fact, if you are a man who would like to make your woman immediately agree to your marriage proposal, you might want to give her fine jewelry that have diamonds in it. Of course, diamonds aren't cheap; just a piece could already cost you a fortune especially if you are rooting for the ones that are rare and have high quality features. However, if you really wish to cement your love with diamonds, you have the option to settle for pieces that are treated in some ways, which would only cost you a fraction of a flawless sparkler's price tag.

Clarity is just one of the most valued traits of diamonds that helps determine the real value of such precious stones. More often than not, untouched loose diamonds are expensive because their clarity have no imperfections, and their other C's are high in quality. However, the market today also has what are now referred to as clarity enhanced sparklers. Compared to untouched diamonds, these treated gemstones are inexpensive due to the manipulations in their clarity feature to make them appear more aesthetically appealing.

Clarity enhanced diamond, as it is called, is a gemstone that had eye visible imperfections. This simply means that the said diamond had low clarity grade, and because no jewelry buyer would like to have a visibly imperfect diamond, its imperfections, that often affect the stone's clarity, are treated in order to make it more visually clear. After the treatment process, there are no apparent differences between enhanced and flawless diamonds. Such types of diamonds are also called "fracture filled diamonds."

There are different methods of enhancements to produce clarity enhanced diamond. Among these methods, drilling is probably the most common and is carried out by drilling a tiny hole into the stone to remove certain minerals or elements that causes the stone's discoloration. Drilling is usually done with the aid of laser, which is capable of neatly creating a tiny hole towards the stone's inclusion. After this, the diamond may be left with a small fracture which would be filled with a heavy glass that is definitely unnoticeable by the naked eyes; this latter process is also referred to as fracture filling.

If you are to buy a diamond, always remember that diamonds that have underwent augmentations aside from basic cutting, cleaning and polishing should be disclosed by the jeweler to the buyer as this is clearly indicated in the FTC rules. However, just for a safe bet you may want to ask the jeweler if you can have the diamond appraised by an independent appraising firm. Always remember that a clarity enhanced diamond has no visual differences with a flawless diamond. Hence, the best course of action is for you to have it tested in order to know if your diamond choice has undergone treatments or not.

If you're a guy who's looking for a decent looking sparkler but you are a bit tight on budget, clarity enhanced sparkler is always a good consideration. Setting aside the clarity, if all the traits of the enhanced diamond are of premium quality and the diamond has a visually clean grade, don't let the idea of treatment hinder you from opting for this option. Like untouched diamonds, treated sparklers also befit well with fine jewelry pieces of all kinds and are guaranteed to last for a lifetime. Thus, enhanced diamonds are good gemstones that could also definitely sweep your woman off her feet.

When it comes to gemstones, loose diamonds are the most preferred to be incorporated in fine jewelry pieces. It cannot be denied though, that diamonds are expensive, especially if you the ones that are flawless and exudes high quality grades. If you want inexpensive yet descent looking diamonds that are aesthetically at par with expensive diamonds, you may want to look at clarity enhanced diamond pieces. They are cost efficient but exemplify high quality aesthetics.

-Lorraine Jacobs